ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Dashboard 33
Switch Trunk Groups Dashboard
To display the following form, select Layer 2 > Trunk Groups.
When trunk groups are configured, you can view the state of each port in the various trunk groups.
NOTE: If Spanning Tree Protocol on any port in the trunk group is set to forwarding, the remaining ports in
the trunk group will also be set to forwarding.
The following table describes the Switch Trunk Groups Dashboard controls:
Table 15 Switch Trunk Groups Dashboard controls
Control Description
Status Shows whether the Trunk Group is enabled (green) or disabled (red) on each port.
Trunk Group Displays the numeric identifier of the Trunk Group.
Switch Port Displays the port number of each port that is a member of the Trunk Group.
Trunk Hash Dashboard
To display the following form, select Layer 2 > Trunk Hash.
The following table describes the Layer 2 (L2) Trunk Hash Dashboard controls:
Table 16 Trunk Hash Dashboard controls
Control Description
Smac Hash Displays the status of the source MAC hash: enabled or disabled.
Dmac Hash Displays the status of the destination MAC hash: enabled or disabled.
Sip Hash Displays the status of the source IP hash: enabled or disabled.
Dip Hash Displays the status of the source IP hash: enabled or disabled.