ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide

Dashboard 36
The following table describes the Uplink Fast Information controls:
Table 18 Uplink Fast General Information controls
Control Description
STP Uplink Fast Mode Displays the status of STP Uplink Fast: ON or OFF.
STP Uplink Fast Rate Displays the value of the Uplink Fast station update rate, in seconds.
Forwarding Database Information
To display the following form, select Layer 2 > FDB.
The forwarding database (FDB) contains information that maps the media access control (MAC) address of each
known device to the switch port where the device address was learned. The FDB also shows which other ports
have seen frames destined for a particular MAC address.
NOTE: The master forwarding database supports up to 8K MAC address entries on the MP per switch.
The following table describes the Forwarding Database Information controls:
Table 19 Forwarding Database Information controls
Control Description
Show Entries of a Specific Source Port Displays FDB entries for the selected port(s).
Show Entries of a Specific State Displays FDB entries by state.
Show Entries of a Specific VLAN Displays FDB entries for the selected VLAN.