ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 107
Table 114 Trunk Group Configuration commands
Command Description
no portchannel {<1-12>} enable Disables the current trunk group.
Command mode: Global configuration
no portchannel {<1-12>} Removes the current trunk group configuration.
Command mode: Global configuration
show portchannel {<1-12>} Displays current trunk group parameters.
Command mode: All
Layer 2 IP Trunk Hash configuration
Trunk hash parameters are set globally for the GbE2 Interconnect Switch. You can enable one or two parameters, to
configure any of the following valid combinations:
• SMAC (source MAC only)
• DMAC (destination MAC only)
• SIP (source IP only)
• DIP (destination IP only)
• SIP + DIP (source IP and destination IP)
• SMAC + DMAC (source MAC and destination MAC)
The following table describes the IP Trunk Hash Configuration commands.
Table 115 IP Trunk Hash Set commands
Command Description
portchannel hash source-mac-address Enable or disable trunk hashing on the source MAC.
Command mode: Global configuration
portchannel hash destination-mac-
address
Enable or disable trunk hashing on the destination MAC.
Command mode: Global configuration
portchannel hash source-ip-address Enable or disable trunk hashing on the source IP.
Command mode: Global configuration
portchannel hash destination-ip-
address
Enable or disable trunk hashing on the destination IP.
Command mode: Global configuration
portchannel hash source-
destination-ip
Enable trunk hashing on the source and destination IP.
Command mode: Global configuration
portchannel hash source-
destination-mac
Enable trunk hashing on the source and destination MAC address.
Command mode: Global configuration
show portchannel hash Display current trunk hash configuration.
Command mode: All