ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 109
Hot Links configuration
The following table describes the Hot Links Configuration commands.
Table 118 Hot Links Configuration commands
Command Description
[no] hotlinks fdb-update Enables or disables FDB Update, which allows the GbE2 to send FDB and
MAC update packets over the active interface.
The default value is disabled.
hotlinks enable Globally turns Hot Links on.
Command mode: Global configuration
no hotlinks enable Globally turns Hot Links off. The default option is off.
Command mode: Global configuration
show hotlinks Displays the current Hot Links configuration.
Command mode: All
Hot Links Trigger configuration
The following table describes the Hot Links Trigger Configuration commands.
Table 119 Hot Links Trigger Configuration commands
Command Description
hotlinks trigger {<1-4>}
forward-delay <0-3600>
Configures the Forward Delay interval, in seconds. The default value is 1.
Command mode: Global configuration
hotlinks trigger {<1-4>} name
<string>
Configures a name for the trigger.
Command mode: Global configuration
[no] hotlinks trigger {<1-4>}
preemption
Enables or disables pre-emption, which allows the Master interface to
transition to the Active state whenever it becomes available.
The default option is
enabled.
Command mode: Global configuration
hotlinks trigger {<1-4>}
enable
Enables the Hot Links trigger.
Command mode: Global configuration
no hotlinks trigger {<1-4>}
enable
Disables the Hot Links trigger.
Command mode: Global configuration
show hotlinks Displays the current Hot Links configuration.
Command mode: All