ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 115
Table 130 Route Map Configuration commands
Command Description
[no] weight <1-65534> Sets the weight of the route map.
Command mode: Route Map
enable Enables the route map.
Command mode: Route Map
no enable Disables the route map.
Command mode: Route Map
no route-map <1-32> Deletes the route map.
Command mode: Route Map
show route-map [<1-32>] Displays the current route configuration.
Command mode: All except User EXEC
IP Access List configuration
The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to configure. The
following table describes the IP Access List Configuration commands.
Table 131 IP Access List Configuration commands
Command Description
[no] access-list <1-8> match-
address <1-32>
Sets the network filter number.
Command mode: Route Map
[no] access-list <1-8> metric
<1-4294967294>
Sets the metric value in the AS-External (ASE) LSA.
Command mode: Route Map
access-list <1-8> action
{permit|deny}
Permits or denies action for the access list.
Command mode: Route Map
access-list <1-8> enable Enables the access list.
Command mode: Route Map
no access-list <1-8> enable Disables the access list.
Command mode: Route Map
no access-list <1-8> Deletes the access list.
Command mode: Route Map
show route-map <1-32> access-
list {<1-8>}
Displays the current Access List configuration.
Command mode: All except User EXEC
Autonomous System Path configuration
The rmap number (1-32) and the path number (1-8) represent the AS path you wish to configure. The following table
describes the Autonomous System Path Configuration commands.
Table 132 Autonomous System Path Configuration commands
Command Description
as-path-list <1-8> as-path
<path-number>
Sets the Autonomous System filter’s path number.
Command mode: Route Map
as-path-list <1-8> action
{permit|deny}
Permits or denies Autonomous System filter action.
Command mode: Route Map
as-path-list <1-8> enable Enables the Autonomous System filter.
Command mode: Route Map
no as-path-list <1-8> enable Disables the Autonomous System filter.
Command mode: Route Map
no as-path-list <1-8> Deletes the Autonomous System filter.
Command mode: Route Map