ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 123
IGMP static multicast router configuration
The following table describes the Static Multicast Router Configuration commands.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
Table 144 IGMP Static Multicast Router commands
Command Description
ip igmp mrouter <port number>
<1-4095> <1-2>
Selects a port/VLAN combination on which the static multicast router is
connected, and configures the IGMP version (1 or 2) of the multicast
router.
Command mode: Global configuration
NOTE: Port number must be an external port (19-24).
no ip igmp mrouter <port number>
<1-4095> <1-2>
Removes a static multicast router from the selected port/VLAN
combination.
Command mode: Global configuration
show ip igmp mrouter Displays the current IGMP Static Multicast Router parameters.
Command mode: All except User EXEC
IGMP filtering configuration
The following table describes the IGMP Filter Configuration commands.
Table 145 IGMP Filtering commands
Command Description
ip igmp profile <1-16> Configures the IGMP filter.
Command mode: Global configuration
ip igmp filtering Enables IGMP filtering globally.
Command mode: Global configuration
no ip igmp filtering Disables IGMP Filtering globally.
Command mode: Global configuration
show ip igmp filtering Displays the current IGMP Filtering parameters.
Command mode: All except User EXEC
IGMP filter definition
The following table describes the IGMP Filter Definition commands.
Table 146 IGMP Filter Definition commands
Command Description
ip igmp profile <1-16> range <IP
multicast address> <IP multicast
address>
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by the
second IP multicast address of the range.
Command mode: Global configuration
ip igmp profile <1-16> action
{allow|deny}
Allows or denies multicast traffic for the IP multicast addresses
specified.
Command mode: Global configuration
ip igmp profile <1-16> enable Enables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16> enable Disables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16> Deletes this filter’s parameter definitions.
Command mode: Global configuration