ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 136
Table 168 RMON Alarm commands
Command Description
rmon alarm <1-65535> rising-
limit <-2147483647 to
2147483647>
Configures the rising threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold, and the value at the
last sampling interval was less than this threshold, a single event is generated.
Command mode: Global configuration
rmon alarm <1-65535> falling-
limit <-2147483647 to
2147483647>
Configures the falling threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold, and the value at the last
sampling interval was greater than this threshold, a single event is generated.
Command mode: Global configuration
rmon alarm <1-65535> rising-
crossing-index < 0-65535>
Configures the rising alarm event index that is triggered when a rising
threshold is crossed.
The range is from 0 to 65535. The default value is 0.
Command mode: Global configuration
rmon alarm <1-65535> falling-
crossing-index < 0-65535>
Configures the falling alarm event index that is triggered when a falling
threshold is crossed.
The range is from 0 to 65535. The default value is 0.
Command mode: Global configuration
rmon alarm <1-65535> owner
<1-127 characters>
Enter a text string that identifies the person or entity that uses this alarm index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
no rmon alarm <1-65535> Deletes this alarm index.
show rmon alarm Displays the current RMON Alarm parameters.
Command mode: All
Port mirroring
Port Mirroring is used to configure, enable, and disable the monitored port. When enabled, network packets being
sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a network analyzer to
the monitor port, you can collect detailed information about your network performance and usage. Port mirroring is
disabled by default.
NOTE: See the “Troubleshooting tools” appendix in the HP ProLiant BL p-Class GbE2 Interconnect Switch
Application Guide for information on how to use port mirroring.
The following table describes the Port Mirroring Configuration commands.
Table 169 Port Mirroring Configuration commands
Command Description
[no] port-mirroring enable Enables or disables port mirroring.
Command mode: Global configuration
show port-mirroring Displays current settings of the mirrored and monitoring ports.
Command mode: All except User EXEC