ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Operations Commands 140
Operations Commands
Introduction
Operations-level commands are used for making immediate and temporary changes to switch configuration.
Operations commands are used for bringing ports temporarily in and out of service. These commands are available
only from an administrator and operator login.
The following table describes basic Operations commands. The following sections provide more detailed information
and commands.
Table 175 Operations commands
Command Description
password Allows the user to change the password. You need to enter the current password in
use for validation.
clear logging Clears all Syslog messages.
Command mode: Privileged EXEC
ntp send Allows the user to send requests to the NTP server.
Command mode: Privileged EXEC
Operations-level port options
Operations-level port options are used for temporarily disabling or enabling a port.
Table 176 Operations-Level Port commands
Command Description
[no] rmon Enables or disables Remote Monitoring for the port. RMON must be enabled for
any RMON configurations to function.
Command mode: Interface port
no interface port <port
number> shutdown
Temporarily enables the port. The port will be returned to its configured
operation mode when the switch is reloaded.
Command mode: Privileged EXEC
NOTE: This command does not enable a port that has been disabled by an ekeying mismatch error.
interface port <port
number> shutdown
Temporarily disables the port. The port will be returned to its configured
operation mode when the switch is reloaded.
Command mode: Privileged EXEC
show interface port <port
number> operation
Displays the current settings for the port.
Command mode: Privileged EXEC