ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Information Commands 26
System user information
The following command displays user status information:
show access user
Command mode: All except User EXEC
Usernames:
user - enabled
oper - disabled
admin - Always Enabled
The following table describes the user status information.
Table 16 User status Information
Field Usage
user Displays the status of the user access level.
oper Displays the status of the oper (operator) access level.
admin Displays the status of the admin (administrator) access level.
Layer 2 information
The following table describes the Layer 2 Information commands. The following sections provide more detailed
information and commands.
Table 17 Layer 2 information commands
Command Usage
show mac-address-table Displays Forwarding Database Information.
Command mode: All
show lacp information Displays a summary of LACP information.
Command mode: All
show hotlinks information Displays Hot Links information.
Command mode: All
show qos transmit-queue information Displays 802.1p Information.
Command mode: All
show dot1x information Displays 802.1x Information.
Command mode: All
show spanning-tree stp <1-32>
information
In addition to seeing if STP is enabled or disabled, you can
view the following STP bridge information:
• Priority
• Hello interval
• Maximum age value
• Forwarding delay
• Aging time
You can also refer to the following port-specific STP
information:
• Port number and priority
• Cost
• State
Command mode: All