ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Information Commands 49
When virtual routers are configured, you can view the status of each virtual router using this command. VRRP
information includes:
• Virtual router number
• Virtual router ID and IP address
• Interface number
• Ownership status
• owner identifies the preferred master virtual router. A virtual router is the owner when the IP address of the
virtual router and its IP interface are the same.
• renter identifies virtual routers which are not owned by this device
• Priority value. During the election process, the virtual router with the highest priority becomes master.
• Activity status
• master identifies the elected master virtual router.
• backup identifies that the virtual router is in backup mode.
• init identifies that the virtual router is waiting for a startup event. Once it receives a startup event, it
transitions to master if its priority is 255, (the IP address owner), or transitions to backup if it is not the IP
address owner.
• Server status. The server state identifies virtual routers.
• Proxy status. The proxy state identifies virtual proxy routers, where the virtual router shares the same IP address
as a proxy IP address. The use of virtual proxy routers enables redundant switches to share the same IP address,
minimizing the number of unique IP addresses that must be configured.
RMON Information
The following command displays general RMON information:
show rmon
Command mode: All
RMON history information
The following command displays RMON history information:
show rmon history
Command mode: All
RMON History group configuration:
Index IFOID Interval Rbnum Gbnum
----- ------------------------------ -------- ----- -----
1 1.3.6.1.2.1.2.2.1.1.24 30 5 5
2 1.3.6.1.2.1.2.2.1.1.24 30 5 5
3 1.3.6.1.2.1.2.2.1.1.18 30 5 5
4 1.3.6.1.2.1.2.2.1.1.19 30 5 5
5 1.3.6.1.2.1.2.2.1.1.24 1800 5 5
The following table describes the RMON History Information parameters.
Table 38 RMON History Information
Command Usage
Index Displays the index number that identifies each history instance.
IFOID Displays the MIB Object Identifier.
Interval Displays the time interval for each for each sampling bucket.
Rbnum Displays the number of requested buckets, which is the number of data slots into which data is to be
saved.
Gbnum Displays the number of granted buckets that may hold sampled data.