ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Statistics commands 65
Hot Links statistics
Use the following command to display Hot Links statistics:
show hotlinks counters
Command mode: All
Hot Links Trigger Stats:
------------------------------------------------------------------
Trigger 1 statistics:
Trigger Name: Corporate Uplinks
Master active: 0
Backup active: 0
FDB update: 0 failed: 0
The following table describes the Hot Links statistics for each trigger:
Table 51 Hot Links trigger statistics
Statistics Description
Master active Total number of times the Master interface transitioned to the Active state.
Backup active Total number of times the Backup interface transitioned to the Active state.
FDB update Total number of FDB update requests sent.
failed Total number of FDB update requests that failed.
Layer 3 statistics
The following table describes basic Layer 3 statistics commands. The following sections provide more detailed
information and commands. Layer 3 functionality is limited in this release.
Table 52 Layer 3 Statistics commands
Command Usage
show ip counters Displays IP statistics.
Command mode: All except UserEXEC
clear ip counters Clears IP statistics. Use this command with caution as it deletes all
the IP statistics.
Command mode: All except UserEXEC
show ip route counters Displays route statistics.
Command mode: All except User EXEC
show ip arp counters Displays Address Resolution Protocol (ARP) statistics.
Command mode: All except UserEXEC
show ip dns counters Displays Domain Name System (DNS) statistics.
Command mode: All except UserEXEC
show ip icmp counters Displays ICMP statistics.
Command mode: All except UserEXEC
show ip tcp counters Displays Transmission Control Protocol (TCP) statistics.
Command mode: All except UserEXEC
show ip udp counters Displays User Datagram Protocol (UDP) statistics. Add the argument,
clear, to clear UDP statistics.
Command mode: All except UserEXEC
show ip igmp counters Displays IGMP statistics.
Command mode: All except UserEXEC