ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Statistics commands 73
GEA Layer 3 statistics
The following command displays GEA statistics:
show ip gea
Command mode: All except User EXEC
GEA L3 statistics:
Max L3 table size : 4096
Number of L3 entries used : 9
Max LPM table size : 4097
Number of LPM entries used : 31
Max block in LPM table : 255
Number of blocks used in LPM table: 24
Management Processor statistics
The following table describes the MP-specific Statistics commands. The following sections provide more detailed
information and commands.
Table 63 MP-specific Statistics commands
Command Usage
show mp tcp-block
Displays all Transmission Control Protocol (TCP) control blocks (TCB) that are in use.
Command mode: All except User EXEC
show mp udp-block
Displays all User Datagram Protocol (UDP) control blocks (UCB) that are in use.
Command mode: All except User EXEC
show mp cpu
Displays CPU utilization for periods of up to 1, 4, and 64 seconds.
Command mode: All except User EXEC
TCP statistics
The following command displays TCP statistics:
show mp tcp-block
Command mode: All except User EXEC
All TCP allocated control blocks:
10ad41e8: 0.0.0.0 0 <=> 0.0.0.0 80 listen
10ad5790: 47.81.27.5 1171 <=> 47.80.23.243 23 established
The following table describes the Transmission Control Protocol (TCP) control block (TCB) statistics shown in this
example:
Table 64 MP specified TCP statistics
Description Example statistic
Memory 10ad41e8/10ad5790
Destination IP address 0.0.0.0/47.81.27.5
Destination port 0/1171
Source IP 0.0.0.0/47.80.23.243
Source port 80/23
State listen/established