ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Statistics commands 74
UDP statistics
The following command displays UDP statistics:
show mp udp-block
Command mode: All except User EXEC
All UDP allocated control blocks:
161: listen
The following table describes the User Datagram Protocol (UDP) control block (UCB) statistics shown in this example:
Table 65 UDP statistics
Description Example Statistic
Control block 161
State listen
CPU statistics
The following command displays the CPU utilization statistics:
show mp cpu
Command mode: All except User EXEC
CPU utilization:
cpuUtil1Second: 8%
cpuUtil4Seconds: 9%
cpuUtil64Seconds: 8%
The following table describes the management port CPU utilization statistics:
Table 66 CPU statistics
Statistics Description
cpuUtil1Second The utilization of MP CPU over 1 second. This is shown as a percentage.
cpuUtil4Seconds The utilization of MP CPU over 4 seconds. This is shown as a percentage.
cpuUtil64Seconds The utilization of MP CPU over 64 seconds. This is shown as a percentage.
Access Control List (ACL) statistics menu
The following table describes the Access Control List (ACL) Statistics commands:
Table 67 ACL statistics menu options
Command Usage
show access-control list <1-4096>
counters
Displays the Access Control List Statistics for a specific ACL.
show access-control meter <1-63>
counters
Displays statistics for a specific ACL meter.
show access-control counters Displays all ACL statistics.
clear access-control list <1-4096>
counters
Clears ACL statistics.
clear access-control meter <1-63>
counters
Clears all ACL metering statistics.