ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 80
Table 72 System Configuration commands
Command Usage
system idle <1-60> Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default
is 5 minutes.
This setting affects both the console port and Telnet port.
Command mode: Global configuration
[no] system notice <1-1024
characters multi-line> <’-‘ to
end>
Displays login notice immediately before the “Enter password:”
prompt. This notice can contain up to 1024 characters and new lines.
Command mode: Global configuration
[no] banner <1-80 characters> Configures a login banner of up to 80 characters. When a user or
administrator logs into the switch, the login banner is displayed.
Command mode: Global configuration
[no] hostname <string> Enables or disables displaying of the host name (system administrator’s
name) in the command line interface.
Command mode: Global configuration
[no] system bootp Enables or disables the use of BOOTP. If you enable BOOTP, the
switch will query its BOOTP server for all of the switch IP parameters.
The default value is
enabled.
Command mode: Global configuration
show system Displays the current system parameters.
Command mode: All
System host log configuration
The following table describes the Syslog Configuration commands.
Table 73 Syslog Configuration commands
Command Description
[no] logging host {<1-2>} address {<IP
address>}
Sets the IP address of the first or second syslog host. For
example, 100.10.1.1
Command mode: Global configuration
logging host {<1-2>} severity {<1-7>} Sets the severity level of the first or second syslog host
displayed. The default is 7, which means log all the severity
levels.
Command mode: Global configuration
logging host {<1-2>} facility {<1-7>} This option sets the facility level of the first or seconds syslog
host displayed. The default is 0.
Command mode: Global configuration
[no] logging console Enables or disables delivering syslog messages to the console.
When necessary, disabling console ensures the switch is not
affected by syslog messages. It is enabled by default.
Command mode: Global configuration