ProLiant BL p-Class GbE2 Interconnect Switch ISCLI Reference Guide

Configuration Commands 93
User ID configuration
The following table describes the User ID Configuration commands.
Table 91 User ID Configuration commands
Command Description
access user <1-10> level
{user|operator|administrator}
Sets the Class-of-Service to define the user’s authority level.
Command mode: Global configuration
access user <1-10> name <1-8
characters>
Defines the user name of maximum eight characters.
Command mode: Global configuration
access user <1-10> password <1-
128 characters>
Sets the user password of up to 128 characters maximum.
Command mode: Global configuration
access user <1-10> enable Enables the user ID.
Command mode: Global configuration
no access user <1-10> enable Disables the user ID.
Command mode: Global configuration
no access user <1-10> Deletes the user ID.
Command mode: Global configuration
show access user Displays the current user ID parameters.
Command mode: All
HTTPS Access configuration
The following table describes the HTTPS Access Configuration commands.
Table 92 HTTPS Access Configuration commands
Command Description
[no] access https enable Enables or disables BBI access (Web access) using HTTPS. The default value is
disabled.
Command mode: Global configuration
access https port <TCP
port number>
Defines the HTTPS Web server port number.
Command mode: Global configuration
access https generate-
certificate
Allows you to generate a certificate to connect to the SSL to be used during the key
exchange. A default certificate is created when HTTPS is enabled for the first time. The
user can create a new certificate defining the information that they want to be used in
the various fields. For example:
• Country Name (2 letter code) [ ]: CA
• State or Province Name (full name) [ ]: Ontario
• Locality Name (for example, city) [ ]: Ottawa
• Organization Name (for example, company) [ ]: Hewlett-Packard
• Organizational Unit Name (for example, section) [ ]: ProLiant
• Common Name (for example, user’s name) [ ]: Mr Smith
• Email (for example, email address) [ ]: [e-mail]
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Command mode: Global configuration
access https save-
certificate
Allows the client, or the Web browser, to accept the certificate and save the certificate
to Flash to be used when the switch is rebooted.
Command mode: Global configuration
show access Displays the current SSL Web Access configuration.
Command mode: All except User EXEC