HP ProLiant BL e-Class Integrated Administrator User Guide

Command Line Interface
Table 4-8: Functionality Exclusive to the Command Line Interface continued
Function Description Capability Exclusive to the
Command Line Interface
General Management Commands, continued
SET SCRIPT
MODE [ON |
OFF]
When SCRIPT MODE is on, all
prompting and verifications of entries
cease.
If SCRIPT MODE is on, the following
commands require a password
argument: ADD USER, SET USER
PASSWORD, or SET PASSWORD.
An enclosure administrator must
change the password so that the
user can log in to the system.
Default values are used for any
parameters that would normally
require user interaction.
All
SHOW EXPERT
{MODE}
:
Displays the current EXPERT MODE
setting for the current user.
None
SHOW SESSIONS
Displays the connection to each bay
and switch if one exists.
Only one user may connect to each
bay and switch at a time. It also
shows the users that are currently
logged in, their port number, connect
time, and remote system name.
All
SHOW
SSHFINGERPRINT
Displays the key fingerprint of the
host SSH public key for the
Integrated Administrator. This can
be used from the serial console to
validate the identity of the Integrated
Administrator before initializing an
SSH connection across a network.
None
SHOW SSHKEY
Displays the contents of the existing
Secure Shell authorized keys file
that is being used for enclosure
administrator key-based
authentication.
Only enclosure administrators
may execute this command.
continued
4-30 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:27 AM