HP ProLiant BL e-Class Integrated Administrator User Guide

Command Line Interface
4-36 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:27 AM
Table 4-8: Functionality Exclusive to the Command Line Interface continued
Enclosure Management Commands, continued
ENABLE NTP
Enables automatic time and date
updates to Integrated Administrator.
Only enclosure administrators
may execute this command.
REMOVE
IPMANAGER <IP
address>
Removes the IP address from the list
of clients allowed to connect to
Integrated Administrator.
Only enclosure administrators
may execute this command.
SET ALERTMAIL
[MAILBOX |
SENDERDOMAIN |
SMTPSERVER]
Sets the e-mail address of the alert
recipient, the domain name, and the
mail server address.
Only enclosure administrators
may execute this command.
SET NTP
[PRIMARY |
SECONDARY |
POLL]
Sets the IP address of the primary
and secondary NTP servers. Also
sets the frequency of the updates.
Only enclosure administrators
may execute this command.
SHOW NETWORK
Displays the DHCP state, Dynamic
DNS state, IP address, subnet mask,
gateway address, primary and
secondary DNS addresses, MAC
address, HTTP and HTTPS server
status, SNMP status, Secure Shell
status, Telnet status, NTP status,
NTP primary and secondary server
address, NTP poll interval, NTP last
update time, IP security
configuration, AlertMail status,
AlertMail mailbox, SMTP server
address and sender domain of the
enclosure.
Only enclosure administrators
may execute this command.