HP ProLiant BL e-Class Integrated Administrator User Guide

Setting Up the System
Table 5-4: IP Security Commands
Function Command
Add an IP address ADD IPMANAGER <ip address>
Remove an IP address REMOVE IPMANAGER <ip
address>
Enable IP Security ENABLE IPSECURITY
Disable IP Security DISABLE IPSECURITY
Setting Up Automatic Time Configuration (NTP)
Automatic time configuration allows the Integrated Administrator to synchronize its
date and time with a server supporting the Network Time Protocol (NTP).
Table 5-5: Automatic Time Configuration Commands
Set the NTP poll interval* SET NTP POLL <seconds>
Set the primary NTP server SET NTP PRIMARY <ip address>
Set the secondary NTP server SET NTP SECONDARY
<ip address>
Disable the secondary NTP server SET NTP SECONDARY NONE
Enable NTP ENABLE NTP
Disable NTP DISABLE NTP
* If an NTP poll interval is not set, it will default to 720 seconds. The
minimum time interval is 60 seconds and the maximum is 9999 seconds.
HP ProLiant BL e-Class Integrated Administrator User Guide 5-25
HP CONFIDENTIAL
Writer: Amy Clute File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:30 AM