HP ProLiant BL e-Class Integrated Administrator User Guide

Performing Common Administrative Tasks
9. When prompted to press the F9 key for ROM-Based Setup Utility:
a. Press the Esc key.
b. Press the 9 key.
10. To exit RBSU:
a. Press the Esc key.
b. When prompted to press F10, press the Esc key and the 0 key to confirm.
11. To close the remote console session:
a. Press the Ctrl-_ keys.
b. Press the D key.
To access the RBSU for a server blade using the command line interface:
CAUTION: Without the server blade health driver, the Integrated Administrator
cannot reboot a server blade.
1. If the server blade is running the Windows 2000 operating system, reboot the
server blade by entering the following commands sequentially:
REBOOT BAY <bay number>
Yes
2. Connect to the server blade by observing its bay number and entering:
CONNECT BAY <bay number>
3. If the server blade is running the Linux operating system reboot the server blade:
a. Press the Enter key to get a prompt.
b. Enter your user name and password.
c. Enter:
REBOOT BAY <bay number> RBSU
HP ProLiant BL e-Class Integrated Administrator User Guide 6-5
HP CONFIDENTIAL
Writer: Amy Clute File Name: g-ch6 Performing Common Administrative Tasks.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:32 AM