HP ProLiant BL e-Class Integrated Administrator User Guide

Performing Common Administrative Tasks
Identifying the Enclosure Using the Unit Identification LED
The virtual button for the Unit Identification LED of an enclosure physically changes
the state of the Unit Identification LED on the rear panel of the enclosure from Off to
On, or vice-versa. The Unit Identification LED illuminates bright blue and is
designed to help a technician quickly identify a specific enclosure in the data center.
To change the state of the Unit Identification LED of the enclosure using the
Web-based user interface:
1. Click the Enclosure tab.
2. Click Virtual Buttons in the left panel.
3. Click Toggle ON or Toggle OFF depending on the current state of the Unit
Identification LED for the enclosure.
Figure 6-5: Accessing the Unit Identification LED button
for the enclosure (shown in the on state)
HP ProLiant BL e-Class Integrated Administrator User Guide 6-13
HP CONFIDENTIAL
Writer: Amy Clute File Name: g-ch6 Performing Common Administrative Tasks.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:32 AM