HP ProLiant BL e-Class Integrated Administrator User Guide

Performing Advanced Functions
3. Open a terminal emulation application.
4. Press and hold the enclosure Unit Identification button (1) and press the
Integrated Administrator Reset button (2) simultaneously on the rear panel of the
server to place the enclosure in Lost Password/Flash Disaster Recovery mode.
2
1
Figure 7-4: Enclosure Unit Identification button and the
Integrated Administrator Reset button
5. When the serial console prompt appears, press the L key.
This command boots the system in Lost Password mode, which resets the
Administrator password to the factory default and displays it on the console.
Launching Flash Disaster Recovery
Flash Recovery mode requires the following items:
•
•
•
•
DHCP server
TFTP server
A connection to the Integrated Administrator serial console
Integrated Administrator ROM image file on the TFTP server
HP ProLiant BL e-Class Integrated Administrator User Guide 7-13
HP CONFIDENTIAL
Writer: Amy Clute File Name: h-ch7 Performing Advanced Functions.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:34 AM