HP ProLiant BL e-Class Integrated Administrator User Guide

Command Line Interface
User Account Commands
Table 4-3: User Account Commands
Command Description Restrictions
ADD GROUP
<group name>
Adds a group to the
system
The default group
description is blank.
Only enclosure administrators may execute this
command.
A maximum of 20 groups may be added to the
system.
The <group name> must be unique to all other
group names and user names and is case-
sensitive. It must be 1-13 characters long and can
include all alphanumeric, the dash, and the
underscore characters. It must begin with a letter.
Note: Administrator, “switcha,” “switchb,” and “all”
are reserved names and cannot be used. This
restriction is not case-sensitive.
See Appendix E, “Factory Default Settings,” for
factory default group accounts.
ADD USER
<user name>
{<password>}
Adds a user to the
system
If a password is not
given, the user is
prompted for one. If
SCRIPT MODE is
enabled, the password
is not optional and
must be provided.
Only enclosure administrators may execute this
command.
A maximum of 25 users may be added in addition
to the reserved accounts.
The <user name> must be unique to all other user
names and group names and is case-sensitive. It
must be 1-13 characters long and can include all
alphanumeric, the dash, and the underscore
characters. The user name must begin with a
letter. The <password> must be 3-8 characters
long and includes all printable characters. If a
password is not entered, the user is prompted for
one.
Note: Administrator, “switcha,” “switchb,” and “all”
are reserved names and cannot be used. This
restriction is not case-sensitive.
See Appendix E, “Factory Default Settings,” for
factory default user accounts.
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-7
HP CONFIDENTIAL
Writer: Amy Clute File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:27 AM