HP ProLiant BL e-Class Integrated Administrator User Guide

Command Line Interface
Table 4-5: Enclosure Management Commands continued
Command Description Restrictions
SET ENCLOSURE
ASSET {TAG}
<asset tag>
Changes the enclosure asset tag Only enclosure administrators
may execute this command.
The <asset tag> must be 1-31
characters long and includes
alphanumeric, dash, and
underscore characters.
The default enclosure asset tag
is blank. To set a blank asset tag,
specify the blank value using
quotes.
SET ENCLOSURE
NAME
<enclosure
name>
Changes the enclosure name Only enclosure administrators
may execute this command.
The <enclosure name> must be
1-32 characters long and
includes all alphanumeric, the
dash, and the underscore
characters.
The default enclosure name is
IA-MAC where MAC is replaced
with the actual MAC address.
SET ENCLOSURE
UID [ON |
OFF]
Turns the enclosure Unit Identification
LED on or off
Only enclosure administrators
may execute this command.
SET RACK NAME
<rack name>
Sets the name for the rack where the
enclosure resides
Only enclosure administrators
may execute this command.
The <rack name> must be 1-32
characters long and includes all
alphanumeric, dash, and
underscore characters.
The default rack name is
“UnnamedRack.”
SHOW CONFIG
Displays the script required to recreate
the settings of the enclosure
Passwords are not included for any
user.
Only enclosure administrators
may execute this command.
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-17
HP CONFIDENTIAL
Writer: Amy Clute File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:27 AM