HP ProLiant BL e-Class Integrated Administrator User Guide

Command Line Interface
Table 4-5: Enclosure Management Commands continued
Command Description Restrictions
SHOW DATE
Displays the current date, time, and
time zone of the internal clock of the
enclosure.
None
SHOW DISPLAY
EVENT
Displays whether event notification is
on or off.
None
SHOW
ENCLOSURE FAN
[<fan number>
| ALL]
Displays the status, redundancy,
partner, speed, and part number for
the requested fan.
If ALL is entered, this information is
shown for all fans.
None
SHOW
ENCLOSURE
INFO
Displays the enclosure name, type,
part number, serial number, and asset
tag; the Integrated Administrator
software and hardware version;
Integrated Administrator MAC address;
and the interconnect tray type, part
number, and serial number.
None
SHOW
ENCLOSURE
POWERSUPPLY
[<power
supply
number> |
ALL]
Displays the power supply status, AC
input status, capacity, input voltage
range #1 (measured in Volts), input
voltage range #2 (if necessary,
measured in Volts), input frequency
range (measured in Hertz), part
number, serial number, and hardware
revision for the specified power supply
if one is specified or for all power
supplies if ALL is given.
None
SHOW
ENCLOSURE
STATUS
Under an enclosure status heading,
this command displays the health,
Integrated Administrator health, and
unit identification LED of the enclosure.
Under a power status heading, this
command displays the power status
and capacity.
None
continued
4-18 HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:27 AM