HP ProLiant BL e-Class Integrated Administrator User Guide

Command Line Interface
Table 4-5: Enclosure Management Commands continued
Command Description Restrictions
SHOW
ENCLOSURE
TEMP
Displays the locale, status (OK, warm,
degraded, or failed), temperature in
degrees Fahrenheit, and temperature
in degrees Celsius for all temperature
sensors.
None
SHOW RACK
NAME <rack
name>
Shows the name for the rack where the
enclosure resides.
The default rack name is
“UnnamedRack.”
None
SHOW SYSLOG
ENCLOSURE
Displays the syslog of the enclosure
with 22 lines per screen.
Typing “q” quits the command; any
other key shows the next screen if
more information exists to display.
Typing “c” continuously displays the
System Log without page breaks.
Only enclosure administrators
may execute this command.
SHOW TRAY
INFO
Displays the manufacturer, product
name, part number, serial number, and
spare number of the interconnect tray.
None
UPDATE IMAGE
<url>
Downloads a new image from a server
over the network and uses the image
to upgrade the firmware of the
enclosure.
Only enclosure administrators
may execute this command.
<URL> can be any of the
following:
• http://host/path
• tftp://host/path
• ftp://username:password
@host/path
• ftp://host/path
where host is a fully qualified
domain name or an IP
address and path is the
pathname of the flash image
to download.
continued
HP ProLiant BL e-Class Integrated Administrator User Guide 4-19
HP CONFIDENTIAL
Writer: Amy Clute File Name: e-ch4 Command Line Interface.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:27 AM