HP ProLiant BladeSystem p-Class System Maintenance and Service Guide

Specifications 110
RJ-45 Patch Panel
Table 5-3 Operating and Performance Specifications for an RJ-45 Patch Panel
Specification Value
Dimensions
Height 26.43 cm (10.41 in)
Depth 70.35 cm (27.70 in)
Width 3.899 cm (1.54 in)
Capability IEEE 802.2, 802.3, 802.3u
Network transfer rate
10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (full-duplex) 1000 Mbps
Connector RJ-45
Cable support
10 Base-TX Categories 3, 4, or 5 UTP (2 or 4 pair); up to 100 m (328 ft)
100 Base-TX Category 5 UTP (2 pair); up to 100 m (328 ft)
1000 Base-TX Category 5E (4 pair); up to 100 m (328 ft)
Power requirements 200 mA at +5 V DC
Temperature range
1
Operating 10° to 35°C (50° to 95°F)
Non-operating -30° to 60°C (-22° to 140°F)
Relative humidity, noncondensing
2
Operating 20% to 80%
Non-operating 5% to 95%
Wet bulb temperature
Operating 28°C (82.4°F)
Non-operating 38.7°C (101.7°F)
1
Operating temperature has an altitude derating of 1°C per 304.8 m (1.8°F per 1,000 ft). No direct sunlight. Upper
operating limit is 3,048 m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3 KPa/4.4 psia.
2
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage is
70 KPa.
HP BladeSystem p-Class GbE Interconnect Switch
Table 5-4 Operating and Performance Specifications for an HP BladeSystem p-Class GbE Interconnect Switch
Specifications Value
Dimensions
Height 26.43 cm (10.41 in)
Depth 70.35 cm (27.70 in)
Width 3.899 cm (1.54 in)