HP ProLiant BladeSystem p-Class System Maintenance and Service Guide

Specifications 111
Table 5-4 Operating and Performance Specifications for an HP BladeSystem p-Class GbE Interconnect Switch
Specifications Value
Capability IEEE 802.1D, 802.1p, 802.1Q, 802.2, 802.3, 802.3u, 802.3ab, 802.3ac,
802.3x, 802.3z
Network transfer rate
10Base-T (half-duplex) 10 Mbps
10Base-T (full-duplex) 20 Mbps
100Base-TX (half-duplex) 100 Mbps
100Base-TX (full-duplex) 200 Mbps
1000Base-T (full-duplex) 2000 Mbps
Connectors
Interconnect switch 2 RJ-45, 1 DB-9
QuadT interconnect module 4 RJ-45
DualTSX interconnect module 2 RJ-45, 2 LC fiber
Cable support
10Base-T Categories 3, 4, or 5 UTP (2 or 4 pair); up to 100 m (328 ft)
100Base-TX Category 5 UTP (2 pair); up to 100 m (328 ft)
1000Base-T Category 5 UTP (4 pair); up to 100 m (328 ft)
1000Base-SX 50/125 um Multimode Fiber with 400 MHz/Km rating has a maximum distance of
500 m (1640 ft)
50/125 um Multimode Fiber with 500 MHz/Km rating has a maximum distance of
550 m (1804 ft)
62.5/125 um Multimode Fiber with 160 MHz/Km rating has a maximum distance
of 220 m (721.8 ft)
62.5/125 um Multimode Fiber with 200 MHz/Km rating has a maximum distance
of 275 m (902.2 ft)
Power requirements 1050 mA maximum at -48 VDC, 50 W per GbE Interconnect Switch
Temperature range
1
Operating 10° to 35°C (50° to 95°F)
Non-operating -30° to 60°C (-22° to 140°F)
Relative humidity, noncondensing
2, 3
Operating 20% to 80%
Non-operating 5% to 95%
Wet bulb temperature
Operating 28°C (82.4°F)
Non-operating 38.7°C (101.7°F)
1
Operating temperature has an altitude derating of 1°C per 304.8 m (1.8°F per 1,000 ft). No direct sunlight. Upper
operating limit is 3,048 m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3 KPa/4.4 psia.
2
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage is
70 KPa.
3
Refer to the HP BladeSystem p-Class GbE Interconnect Switch User Guide for detailed information.