HP ProLiant BladeSystem p-Class System Maintenance and Service Guide

Specifications 112
HP BladeSystem p-Class GbE2 Interconnect Switch
Table 5-5 Operating and Performance Specifications for a HP BladeSystem p-Class GbE2 Interconnect Switch
Specification Value
Dimensions
Height 26.43 cm (10.41 in)
Depth 70.35 cm (27.70 in)
Width 3.90 cm (1.54 in)
Capability IEEE 802.1D, 802.1Q, 802.3, 802.3u, 802.3ab, 802.3ac, 802.3ad, 802.3x,
802.3z
Network transfer rate
10Base-T (half-duplex) 10 Mbps
10Base-T (full-duplex) 20 Mbps
100Base-TX (half-duplex) 100 Mbps
100Base-TX (full-duplex) 200 Mbps
1000Base-TX (half duplex) 1000 Mbps
1000Base-TX (full-duplex) 2000 Mbps
1000Base-SX (full-duplex) 2000 Mbps
Connectors
GbE2 Interconnect Switch 2 RJ-45, 1 DB-9
QuadT2 interconnect module 4 RJ-45
QuadSX interconnect module 4 SFP fiber transceivers with LC connectors
Cable support
10Base-T Categories 3, 4, or 5 UTP (2 pair); up to 100 m (328 ft)
EIA/TIA-568 100-ohm STP; 100 m (328 ft)
100Base-T Category 5 UTP (2 pair or 4 pair); up to 100 m (328 ft)
EIA/TIA-568 100-ohm STP; 100 m (328 ft)
1000Base-T Category 5e UTP (4 pair); up to 100 m (328 ft)
EIA/TIA-568 100-ohm STP; 100 m (328 ft)
1000Base-SX 50/125 um Multimode Fiber with 400 MHz/Km rating has a maximum distance of
500 m (1640 ft)
50/125 um Multimode Fiber with 500 MHz/Km rating has a maximum distance of
550 m (1804 ft)
62.5/125 um Multimode Fiber with 160 MHz/Km rating has a maximum distance
of 220 m (721.8 ft)
62.5/125 um Multimode Fiber with 200 MHz/Km rating has a maximum distance
of 275 m (902.2 ft)
Power requirements 2040 mA maximum at -48 VDC, 98 W per interconnect switch without GbE2
Storage Connectivity kit
2355 mA maximum at -48 VDC, 113 W per interconnect switch with GbE2
Storage Connectivity kit
Temperature range
1
Operating 10° to 35°C (50° to 95°F)
Non-operating -30° to 60°C (-22° to 140°F)
Relative humidity, noncondensing
2, 3
Operating 20% to 80%
Non-operating 5% to 95%
Wet bulb temperature