HP ProLiant BladeSystem p-Class System Maintenance and Service Guide

Specifications 116
Table 5-9 Operating and Performance Specifications for HP BladeSystem p-Class 3U Power Enclosures
(International)
Specification Value for Single-Phase Model Value for Three-Phase Model
Rated output power 4,798 W 8,790 W
Nominal power 4,598 W at 230 VAC 8,790 W at 230 VAC L-N
Ambient temperature range
1
Operating 10° to 35°C (50° to 95°F) 10° to 35°C (50° to 95°F)
Shipping -30° to 60°C (-22° to 140°F) -30° to 60°C (-22° to 140°F)
Relative humidity, noncondensing
2
Operating 20% to 80% 20% to 80%
Non-operating 5% to 95% 5% to 95%
Wet bulb temperature
Operating 28°C (82.4°F) 28°C (82.4°F)
Non-operating 38.7°C (101.7°F) 38.7°C (101.7°F)
1
Operating temperature has an altitude derating of 1°C per 304.8 m (1.8°F per 1,000 ft). No direct sunlight. Upper
operating limit is 3,048 m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3 KPa/4.4 psia.
2
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage is
70 KPa.
Hot-Plug Power Supply
Table 5-10 Operating and Performance Specifications for an HP BladeSystem p-Class 1U Power Supply
Specification Value
Dimensions
Height 40 mm (1.6 in)
Depth 531.4 mm (20.9 in)
Width 68.5 mm (2.7 in)
Weight 2.7 kg (6 lb)
Input voltage specifications
Rated input voltage 200 VAC to 240 VAC
Frequency range 50 Hz to 60 Hz
Rated input power 2310 W
Rated input current 13 A
Output voltage specifications
Rated output voltage -48.8 VDC to -54 VDC
+4.75 VDC to +5.25 VDC
Rated output power 2,000 W
Rated output current 38.9 A (on -48 VDC output)
5 A (on +5 Vaux output)
Ambient temperature range
1
Operating 5°C to 35°C (41°F to 95°F)
Non-operating -40°C to 70°C (-40°F to 158°F)
Relative humidity, noncondensing
2
Operating 5% to 95%
Non-operating 5% to 95%