HP ProLiant BladeSystem p-Class System Maintenance and Service Guide

Removal and Replacement Procedures 52
Figure 2-34 Removing the hinges from the rack
Reverse steps 1 through 13 to replace the bus bars.
Mini Bus Bar Dual Power Box
WARNING! Be sure that power is not applied to the Dual Power Box power cables before connecting to the
power enclosure. Disconnect all AC power cords from the power source.
WARNING! Be sure that all power enclosure circuit breakers are locked in the off position before connecting
any power components.
To remove the Mini Bus Bar Dual Power Box(es):
1. Remove the mini bus bar cover.
Figure 2-35 Removing mini bus bar cover
2. Remove the Dual Power Box cables from the mini bus bar.