Microsoft Windows Event ID and SNMP Traps Reference Guide for use with SmartStart version 8.25

Server agents 91
NT Event ID: 1086 (Hex)0x8435043e (cpqsvmsg.dll)
Log Severity: Warning (2)
Log Message: A System Fan Condition has been set to degraded. If the system fan is part of a
redundancy group, the system will not be shut down. If the system fan is not part of a redundancy
group, the system may be shut down depending on the state of the thermal degraded action value
'%4'.
SNMP Trap: cpqHe3ThermalSystemFanDegraded - 6021 in CPQHLTH.MIB
Symptom: The system fan status has been set to degraded. An optional system fan is not operating
normally.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “An optional fan is not operating normally.”
NT Event ID: 1087 (Hex)0x4435043f (cpqsvmsg.dll)
Log Severity: Information (1)
Log Message: A System Fan Condition has been set to OK. The server's system fan has resumed
normal operation.
SNMP Trap: cpqHe3ThermalSystemFanOk - 6022 in CPQHLTH.MIB
Symptom: The system fan status has been set to OK. Any previously non-operational system fans have
returned to normal operation.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “System fan has returned to normal operation.”
NT Event ID: 1088 (Hex)0xc4350440 (cpqsvmsg.dll)
Log Severity: Error (3)
Log Message: A Processor Fan Condition has been set to failed. The system will be shut down due to
this condition.
SNMP Trap: cpqHe3ThermalCpuFanFailed - 6023 in CPQHLTH.MIB
Symptom: The CPU fan status has been set to failed. A processor fan is not operating normally. The
server is shut down.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “CPU fan has failed. Server will be shutdown.”
NT Event ID: 1089 (Hex)0x44350441 (cpqsvmsg.dll)
Log Severity: Information (1)
Log Message: A Processor Fan Condition has been set to OK. The server's processor fan has resumed
normal operation.