Microsoft Windows Event ID and SNMP Traps Reference Guide for use with SmartStart version 8.25
Server agents 93
Supporting SNMP Trap Description: “Errors occurred during server restart.”
Event Identifiers 1103-1183
NT Event ID: 1103 (Hex)0x8435044f (cpqsvmsg.dll)
Log Severity: Warning (2)
Log Message: The Fault Tolerant Power Sub-system has been set to Degraded. Check power
connections and replace the power supply as needed.
SNMP Trap: cpqHe3FltTolPwrSupplyDegraded - 6028 in CPQHLTH.MIB
Symptom: The fault tolerant power supply sub-system condition has been set to degraded.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “The server power supply status has become degraded.”
NT Event ID: 1108 (Hex)0x84350454 (cpqsvmsg.dll)
Log Severity: Warning (2)
Log Message: The Remote Insight Board has detected unauthorized login attempts. More than '%4'
login attempts detected.
SNMP Trap: cpqSm2UnauthorizedLoginAttempts - 9003 in CPQSM2.MIB
Symptom: Remote Insight/Integrated Lights-Out Unauthorized Login Attempts. The Remote
Insight/Integrated Lights-Out firmware has detected unauthorized login attempts.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSm2CntlrBadLoginAttemptsThresh
Supporting SNMP Trap Description: “More than [cpqSm2CntlrBadLoginAttemptsThresh] unauthorized
login attempts detected.”
NT Event ID: 1109 (Hex)0xc4350455 (cpqsvmsg.dll)
Log Severity: Error (3)
Log Message: The Remote Insight Board has detected a battery failure.
SNMP Trap: cpqSm2BatteryFailed - 9004 in CPQSM2.MIB
Symptom: Remote Insight Battery Failed. The Remote Insight battery has failed and needs to be
replaced.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “Remote Insight battery failed.”
NT Event ID: 1110 (Hex)0xc4350456 (cpqsvmsg.dll)
Log Severity: Error (3)