ProLiant BL25p Server Blade Maintenance and Service Guide

Removal and replacement procedures 19
3.
Remove the air baffle.
To replace the component, reverse the removal procedure.
CAUTION: To avoid overheating of the dual core processor, the old air baffle must be replaced when
upgrading from a single core processor to a dual core processor.
IMPORTANT: To ensure proper cooling, be sure the correct processor air baffle (on page 18) is installed
at all times.
Fan assembly
To remove the component:
1. Power down the server blade and remove it from the server blade enclosure ("Server blade
preparation" on page 11).
2. Remove the access panel ("Access panel" on page 12).
3. Remove the air baffle ("Air baffle" on page 18).
4. Disconnect the fan assembly cables from the system board.
IMPORTANT: Be sure to connect the cables to the same connectors when replacing the fan assembly.