ProLiant BL25p Server Blade Maintenance and Service Guide

Removal and replacement procedures 27
13.
Disconnect the LED cable from the system board before removing the system board from the server
blade.
14. Slide the system board toward the front of the server blade.
15. Lift the system board until it comes off the alignment keys.
16. Lift the edge of the system board nearest the system switches. The edge of the system board nearest
the array controller connectors tilts down into the chassis, and the edge of the system board nearest
the system switches tilts up out of the chassis.
17. Lift the system board out of the chassis.
To replace the component, reverse the removal procedure.