HP ProLiant BL2x220c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 27
4. Open the DIMM slot latches.
5. Remove the DIMM.
To replace the component, reverse the removal procedure.
SD card adapter
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To remove the component:
1. Power down the server blade (on page 21).
2. Remove the server blade (on page 22).
3. Access the internal server components (on page 23).
4. Remove the SD card adapter.
To replace the component, reverse the removal procedure.