HP ProLiant BL2x220c G7 Server Blade Maintenance and Service Guide

Component identification 58
Position Function Default
5
Password disabled Off
6
Reset configuration Off
7
Reserved Off
8
Reserved Off
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
Access components
CAUTION: The jackscrews control the unseating and seating of critical system connectors.
Failure to use the jackscrews to remove and install the server B assembly can cause the system
boards to fail.
Item Description
1
Jackscrew 1
2
Jackscrew 2
3
T-15 Torx wrench