HP ROM-Based Setup Utility User Guide

RBSU CLI Commands
The CLI mode of RBSU is a different interface that provides equivalent functionality to the menu-based
mode.
DescriptionUsageCommand
Displays all supported commands or
usage and descriptions of a specific
command.
HELP or HELP <command>HELP
Exits RBSU and resets or power-cycles
system.
EXIT, QUITEXIT, QUIT
SHOW CONFIG displays all available
<options>.
SHOW CONFIG
SHOW CONFIG <option>
SHOW CONFIG
SHOW CONFIG <option> displays
current setting and all other setting
choices for <option> specified.
SHOW CONFIG SCRIPT displays the
script required to recreate the settings
of the server.
Displays list of CONFIG options that
are viewable or settable using SHOW
or SET CONFIG on this server.
SHOW CONFIG OPTIONSSHOW CONFIG OPTIONS
Displays the script of SET commands
required to recreate all the server
SHOW CONFIG SCRIPTSHOW CONFIG SCRIPT
system-related configuration settings.
Does not display script for Passwords,
Date/Time, or Serial Number.
Sets CONFIG option setting to choice
specified by <choice> that corresponds
SET CONFIG <choice> <option>SET CONFIG
to the number of the choice listed by
SHOW CONFIG for that particular
option.
Displays current serial number value.SHOW SNSHOW SN
Sets serial number to the value
specified.
SET SN <serial #>SET SN
Displays currently configured boot
controller order list.
SHOW BOOTSHOW BOOT
Sets new primary boot controller to
controller number in list displayed by
SET BOOT <controller #>SET BOOT
SHOW BOOT command, and then
displays the new list.
Sets controller order # entry to device
specified by PCI ID and location. This
SET BOOT <order #> <PCI
Vendor/DevID> <PCI Slot #> <PCI
Bus #> <PCI Device #> <PCI Fcn #>
SET BOOT (alternate usage for
scripting)
format is only used by SCRIPT driven
commands. Order # is 1-based where
1 is the primary boot controller, and so
on.
Displays current standard boot order
device list of IPL devices in priority
order.
SHOW IPLSHOW IPL
Sets standard boot order priority for the
IPL device specified to new priority
SET IPL [A:|C:|CD|PXE] <new IPL
Priority>
SET IPL
number specified. The device specified
must be represented in the current IPL
list displayed by SHOW IPL.
196 RBSU BIOS Serial Console (CLI)