HP ROM-Based Setup Utility User Guide

HP Smart Array B320i RAID Configuration
NOTE: This option is available only on server models that support Dynamic Smart Array. For
more information, see the HP Dynamic Smart Array RAID Controller User Guide on the HP website
(http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?
docId=emr_na-c03326739).
IMPORTANT:
• Changing this setting may result in data loss or data corruption on existing drives.
• Back up all drives before enabling this feature.
This option controls HP Dynamic RAID support on the SAS controller (embedded or optionally
purchased on a daughter card).
After reading the warning message, press any key to display the following settings:
• Enabled
• Disabled
NOTE: The default setting for this option is dependent on the server model.
44 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)