HP ProLiant BL35p Server Blade User Guide

Hardware options installation 25
9.
Install the hard drive cage in the server blade.
SAS hard drive option
The drive cage assembly lower drive bay is designated as the primary hard drive bay and must be
populated first.
If the server blade is installed, back up all server blade data, power down the server blade, and remove
the server blade from the sleeve. For the complete power down and server blade removal procedures,
refer to the server blade documentation that shipped with the server blade or the server blade
documentation on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info
).
To install the component:
1. Power down the server blade (on page 12).
2. Remove the server blade (on page 13) from the sleeve.
3. Remove the drive cage assembly.