HP ProLiant BL35p Server Blade User Guide

Hardware options installation 29
1.
Before installing the component refer to the label on the FC adapter to verify compatibility with the
server blade.
2. Back up all server blade data.
3. Be sure that the server blade has the most recent ROM version.
CAUTION: Be sure that you have the current version of the system ROM. Without the correct firmware
version, the server and hardware options may not function properly. For the most current version of the
ROM, go to the HP website (http://www.hp.com/support
).
4. Power down the server blade (on page 12).
5. Remove the server blade (on page 13) from the sleeve.
6. For the Emulex-based FC adapter, set the server selector switch.
IMPORTANT: Be sure both server selector switches are set to 0 or both server selector switches are set to
1.