HP ProLiant BL35p Server Blade User Guide

Hardware options installation 30
7.
Install the FC adapter.
Refer to Internal components (on page 8) for the location of the FC adapter connectors.
The HP ProLiant BL35p Server Blade requires specific Microsoft® Windows® SAN drivers to support an
optional dual port Fibre Channel adapter.
To download the most current SAN driver, begin by referring to the HP support website
(http://www.hp.com/support/files
).
At the support website, enter the product name, select the task to download drivers and software, and
follow the on-screen instructions.
Multifunction network adapter option
Before installing the component:
1. Back up all server blade data.
2. Be sure that the server blade has the most recent ROM version.
CAUTION: Be sure that you have the current version of the system ROM. Without the correct firmware
version, the server and hardware options may not function properly. For the most current version of the
ROM, go to the HP website (http://www.hp.com/support
).
3. Power down the server blade (on page 12).
4. Remove the server blade (on page 13) from the sleeve.
5. Remove the standard NIC mezzanine card.