HP ProLiant BL35p Server Blade User Guide

Configuration and utilities 38
•
Removing an adapter from the Boot Order list by moving the cursor to the Boot Order field of the
adapter, and then pressing Del.
Changes must be saved before exiting the screen.
The Adapter List screen is also the gateway to three other screens:
• The Global Properties screen (on page 38)
• The Adapter Properties screen (on page 39)
• The Exit Menu screen (on page 44)
Global Properties screen
Use the Global Properties screen to change global scope settings. To access the Global Properties screen,
press Alt+N on the Adapter List screen.
Field Description
Pause when Boot Alert
Displayed
This option specifies whether the BIOS pauses for user acknowledgment after
displaying an alert message during the boot process. Possible values:
• No (BIOS continues after a message is displayed.)
• Yes (User must press a key for BIOS to continue after a message is displayed.)
Boot information
display mode
This option controls how much information the BIOS displays about adapters and
devices during the boot process. Possible values:
• Display adapters only
• Display adapters and all devices
• Display minimal information
• Display adapters and installed devices
Support interrupt This option enables prevention of a hook on INT40, if required. Possible values:
• Hook interrupt (default)
• Bypass interrupt hook
Restore defaults
Press Enter while this field is selected to return the values in the others fields on this
screen to their default settings.
To exit the Global Properties screen:
• To return to the Adapter List screen, press Alt+N.