HP ProLiant BL45p Generation 2 Server Blade Maintenance and Service Guide

Removal and replacement procedures 39
HP Smart Array E200i Controller battery cable
To remove the component:
1. Power down the server blade (on page 28).
2. Remove the server blade (on page 28).
3. Remove the access panel ("Access panel" on page 29).
4. Remove the HP Smart Array E200i Controller battery ("HP Smart Array E200i Controller battery" on
page 38).
5. Disconnect the battery cable from the cache module.
To replace the component, reverse the removal procedure.
HP Smart Array E200i Controller cache module
To remove the component:
1. Power down the server blade (on page 28).
2. Remove the server blade (on page 28).
3. Remove the access panel ("Access panel" on page 29).