Manualshelf

HP ProLiant BL45p Generation 2 Server Blade Maintenance and Service Guide

ManualsBrandsHP ManualsServerHP ProLiant BL45p G2 Server
61626364656667686970
Removal and replacement procedures 64
6.
Remove all DIMMs ("DIMMs" on page 35).
7. Remove the FC mezzanine, if installed ("Fibre Channel mezzanine" on page 36).
8. Remove the NIC mezzanine, if installed ("NIC mezzanine" on page 36).
9. Remove the I/O signal board ("I/O signal board" on page 37).
10. Disconnect all cables connected to the system board ("System board components" on page 75).
11. Remove the secondary system board ("Secondary system board" on page 49).
12. Remove the secondary chassis.
13. Remove the primary access panel ("Primary access panel" on page 29).
14. Remove the power button/LED board cable ("Power button/LED board" on page 62).
15. Remove the power button/LED board ("Power button/LED board" on page 62).
16. Remove the front bezel.
To replace the component, reverse the removal procedure.