HP ProLiant BL45p Generation 2 Server Blade Maintenance and Service Guide

Removal and replacement procedures 65
Secondary front bezel
To remove the component:
1. Power down the server blade (on page 28).
2. Remove the server blade (on page 28).
3. Remove the secondary access panel ("Secondary access panel" on page 29).
4. Remove the secondary front bezel.
To replace the component, reverse the removal procedure.
Secondary LED board cable
To remove the component:
1. Power down the server blade (on page 28).
2. Remove the server blade (on page 28).
3. Remove the secondary access panel ("Secondary access panel" on page 29).