HP Intelligent Provisioning User Guide

3. Edit the setting(s) as necessary. Click Apply.
Network Settings–SNTP
• Use DHCPv4 Supplied Time Settings—Specifies whether iLO uses the DHCP server-supplied
time.
• Use DHCPv6 Supplied Time Settings—Specifies whether iLO uses version 6 of the DHCP
server-supplied time.
• Propagate NTP Time to Host—Specifies whether ILO uses NTP time instead of the DHCP
server-supplied time.
• Primary Time Server—If DHCPv4 or DHCPv6 SNTP is not used, enter a time server address
in the Primary Time Server box.
• Secondary Time Server—If DHCPv4 or DHCPv6 SNTP is not used, enter a secondary time
server address in the Secondary Time Server box.
• Time Zone—A drop-down list of worldwide time zones.
To edit the settings on the SNTP tab:
1. In the iLO Configuration Utility window, click Network Settings. The General tab data appears.
2. Click the SNTP tab. The SNTP tab data appears.
64 Using Intelligent Provisioning