HP Intelligent Provisioning User Guide

When initially configuring Intelligent Provisioning for use, this screen is displayed in “Step 3:
Registering for Insight Remote Support” (page 10).
Unregistering from Insight Remote Support
The process to unregister from Insight Remote Support depends on whether you used the Direct
Connect or Central Connect registration method.
Unregistering from Insight Remote Support Direct Connect configurations
Use the following procedure to discontinue monitoring of an HP ProLiant Gen8 server.
1. Navigate to the Perform Maintenance screen and select HP Insight Remote Support.
2. Click Unregister.
The following message appears:
This server is not registered.
Unregistering from Insight Remote Support Central Connect configurations
1. Log in to the Insight RS Console.
2. Do one of the following:
• To stop monitoring an HP ProLiant Gen8 server temporarily, select the server on the
Devices→Device Summary tab in the HP Insight RS Console, and then select
ACTIONS→DISABLE SELECTED.
NOTE: Unregistering directly from Intelligent Provisioning is the same as temporarily
disabling the system in the Insight RS Console.
• To stop monitoring an HP ProLiant Gen8 server permanently, delete the server from the
Insight RS Console. To delete the server, select it on the Device Summary tab, and then
select ACTIONS→DELETE SELECTED.
70 Using Intelligent Provisioning