Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 91
Viewing FC/FCoE Target Mapping (Windows and Solaris)
The Target Mapping tab enables you to view current target mapping and to set up persistent binding.
To view target mapping:
1. Select Host or Fabric view.
2. In the discovery-tree, select the FC/FCoE adapter port whose target mapping information you
want to view.
3. Select the Target Mapping tab.
Figure 51: Target Mapping tab
Target Mapping Field Definitions
Current Settings Area
• Active Bind Type - WWPN, WWNN, or a destination identifier (D_ID).
• Automapping - The current state of SCSI device automapping: enabled (default) or disabled.
Current Mappings Area
• This table lists current mapping information for the selected adapter port.
Note: Persistent binding is not supported on Solaris systems.
Note: The Target Mapping tab is not available on COMSTAR ports.