Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 99
Figure 57: OneConnect Adapter Information tab
To change the personality of a OneConnect adapter:
1. From the discovery-tree, select the OneConnect adapter whose personality you want to change.
The Adapter Information tab is displayed.
2. From the Personality area of the Adapter Information tab, select the personality type you want
and click Apply.
3. Reboot the host for the personality change to take effect.
Configuring the FC/FCoE Adapter Driver
The OneCommand Manager application displays available driver parameters along with their defaults
and maximum and minimum settings. A description of the selected parameter is also provided. This
section contains information you should be aware of when working with driver parameters. For a more
detailed description of specific driver parameters, refer to the appropriate Emulex driver User Manual.
(Not available in read-only mode.)
Note: If the adapter does not support personalities, personality controls are not displayed.
Also, if the adapter does not support a particular personality type that control is
disabled.
Note: This section only applies to FC and FcoE adapters. It does not apply to NIC-Only and
iSCSI adapters.