Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)
The OneCommand Manager User Manual Page 107
6. Click Save. The Save Driver Parameters dialog box appears. You can save the file to a different
directory or change its name.
Figure 61: Save Driver Parameters dialog box
7. Use the two radio buttons to choose the type of parameters to save. You can save all
parameters or only those parameters whose current values differ from their corresponding
default values.
A list of the saved parameters and their current values show in the Saved Parameters box.
8. Click Save.
Assigning Batch Mode Parameters
To assign batch mode parameters to adapters:
1. From the Batch menu, select Update Driver Parameters. (You do not need to select any
discovery-tree elements at this time.)
2. When the Batch Driver Parameter Update dialog box appears, click Browse.
3. The Driver Parameter File Selection dialog box appears. Select the file you want to use and click
OK. A dialog box appears notifying you that the OneCommand Manager application is searching
for compatible adapters.
Once compatible adapters are found, the Driver Parameter File field of the Batch Driver Param-
eter Update dialog box displays the selected file's path. The “Supported Models” text field dis-
plays a list of all adapter models that are compatible with the selected file. The set of compatible
adapters appears in the dialog box’s discovery-tree.
Using the Display Options settings you can choose how adapters are displayed in the discovery-
tree. Clicking Group by Host displays adapters in a host-centric view. Clicking Group by Fab-
ric shows hosts in a fabric-centric view with their fabric addresses. The WWPN and host name
for each downloadable port is displayed under its respective fabric.
You can also display host groups by checking Show Host Groups. To display a particular host
group, choose that group from the Host Group menu.
Checkboxes next to the host and adapter entries are used to select or deselect an entry. Check-
ing an adapter selects or removes that adapter; checking a host removes or selects all eligible
adapters for that host.